|
CABLE HUTCH PLATE 4.6 HOLES We have gained an expertise in manufacturing and exporting a wide range of finest quality telecom equipment and parts. We are offering CABLE HUTCH PLATE 4.6 HOLES that are specifically designed as per the industrial requirements. For manufacturing these products finest raw materials that are procured from trusted sources are used. The wide assortment of CABLE HUTCH PLATE 4.6 HOLES is known for reliability and huge capacity. With following technical details these plates can be availed. I. System Description
A typical cable entry system is made up of the following parts:
1. Instert
2. 4" rubber booth with metal ring
3. Metal panel
4. Installation accessories II. Description of Parts
1. Insert
The rubber insert is fixed into the rubber boot. Cables goes through the hole or holes in the
insert. To describe the design of an insert, the following info is to be clarified:
A. Applicable Cables: 1/2, 7/8, 11/4, 15/8, etc;
B. Number of Holes in one insert: 1, 2, 3, etc. 2. Rubber Boot
The rubber boot function to fix the inserts to the metal panel,
usually 4" dia with stainless steel rings. 3. Metal Panel
To specify a wall entry panel, the following information is to be clarified:
A. Number of 4" holes with cones for rubber boots
B. Lay out of the holes: 1 x 1, 2 x 2, 2 x 5, etc
C. Size of the metal panel
D. Details for installation to the wall 4. Installation Accessories
Customized design considering the material of the wall.
SYNERGY recommends the following designs:
A. M6 x 60 screw with anchors
B. Customized designs III. A clear description of the cable entry system includes the following info: Available Example/ Customer Choice
Cable Type Applicable
1/2, 7/8, 11/4, 15/8, etc. 7/8" Number of Holes in the Insert
0, 1, 2, 3, or customized 3 Number of Rubber Boots
customized 16 Lay-out of Rubber Boots
customized 4x4 Size of Metal Panel
customized 25.5"x25.5" Installation Accessories
customized M6x60mm screw with anchor Description of the example
: a wall entry system for 7/8 cables, with 16 rubber boots laid out
in 4x4, with 3 holes in each insert, size of panel is 25.5"x25.5",
installed to wall with M6x60mm screw with anchor. Model No. YL-WE783X16A IV. Notes:
1. Parts in the above wall entry system are available separately.
2.
Customized designs are welcome.
|
